Ktema är ett absolut mästerverk från legendariske högtalardesignern Franco Serblin (grundaren av Sonus Faber) och en av de sista högtalarna han designade innan sin död.
Ktema är tillsammans med Sonus Faber Stradivari Homage, TAD R1-TX och CR1-TX våra personliga favorithögtalare. Rekommenderas VARMT!
Finns snart i butiken för demo!
Egenskaper
“Sometimes we stand in awe, praising the beauty of the music…
…to recreate these particular moments is the goal of Ktêma.”
Geometry: four-way topology, five units. The two low-frequency radiators are compression-loaded and room-interfaced at the lower part of the rear of the enclosure. Above the “fusion” frequency, the mid-high cardioid radiators reproduce the significant part of the spectrum, at the top section of the front of the cabinet.
The cabinet is a rigid, triple arch-shaped structure. The two lateral front cheeks are concave, while the woofer compressor is convex.
The tweeter is a well-established and time-proven 28mm soft-dome unit, created by Ragnar Lian, one of the greatest Danish masters of transducer design.
The midrange array consists of two custom-made 4in units in a stepcompensated baffle, in a cardioid acoustic-resistance configuration, for the most accurate reproduction of the musical perspective.
The woofers are custom-made 9in metal cone, piston performanceoptimised units, in a compression-controlled and room-interfaced configuration.
The crossover is a mutational variable slope, coherent spatial radiation design.
Yter pure Silver-Palladium mono-wiring used throughout.
Specifkationer
Frequency Response: 26Hz - 33Khz, in room
Nominal Impedance: 4 ohm (minimum 3, 2 ohm at 70 Hz)
Sensitivity: 92 dB/W/m
Minimum power amplifier: 20W per channel
Dimensions: 42,5 cm × 46 cm × 111 cm (unpacked) 52 cm × 57 cm × 110,5 cm (packed)
Weight: 110 kg/pair (unpacked) - 127 kg/pair (packed)
Finishing: High gloss piano black, hand-polished aluminium top & bottom Satin Sycamore, hand-polished aluminium top & bottom